Rear Tie Bar?

[Nless_Dream]

I was wondering if you can make the Rear Tie Bar to replace the flimsy stock part. SRT and L-Tuned are really expensive. thought it looked good with your logo on it :) and hopefully cheaper.

[FIG]

which one? the rear subframe braces? I actually designed the tunedparts version. I gotta finish this kitchen so I can hook up my CNC :D

[Nless_Dream]

http://www.l-tunedparts.com/photos/2486/0.dat?1176395957

mazzuri has them for $65

i like mazzuri design because its not too bulky or too thin. good price range also.

http://www.mazzurisuper.com/shop/images/products/85_large.jpg

[Nless_Dream]

time to FIG out my car lol

if u tell me u can make one for me. then i'll hold off from buying from Mazzuri.

[FIG]

yeah the upper ones are my design, I can work a $65 price tag once I get my machine up and running. I think a set of Arms would do you better that the bar though IMO. I have a rough machined set I can sell ya cheap. I just need to finish cutting them out and file the corners.

Fig

[Nless_Dream]

yeah the upper ones are my design, I can work a $65 price tag once I get my machine up and running. I think a set of Arms would do you better that the bar though IMO. I have a rough machined set I can sell ya cheap. I just need to finish cutting them out and file the corners.

Fig

should be ok, its under the car so no need for bling since its gonna get dirty anyways. u got my address, tell me how much.

pics would be good also

[FIG]

i'll get em

[GhostlyEcho]

if he doesnt want it i will take it :glare:

[FIG]

http://i88.photobucket.com/albums/k195/Figbline720/DSC07222.jpg
http://i88.photobucket.com/albums/k195/Figbline720/DSC07223.jpg


they just need to be cut cleaned up...and the slight mis machining should not have a negative impact.


Fig

[GhostlyEcho]

sell them to me !!!!!!! lol


toms racing makes them too but they are not as pretty as the ones u made figs and how come l tuned doesnt put ur name on the product

[FIG]

Because I donated my time to David (tunedparts) because I felt sorry for him. I will be making them for myself once I get my machine up. Live and learn.

[Nless_Dream]

sure fig, just finish it up and send a set to me. let me know how much also. i would prefer the non-mis machining one but if its cheap enough, i'll try it out until u get your final one done, then i'll get those too.

[Nless_Dream]

if he doesnt want it i will take it :glare:

:glare: get back in line :gtfo:

[GhostlyEcho]

:glare: get back in line :gtfo:

:nono2:

[GhostlyEcho]

Because I donated my time to David (tunedparts) because I felt sorry for him. I will be making them for myself once I get my machine up. Live and learn.

u should patent everything u make so u can sue these scumbags :yuck::lol2:;)


:glare:

[Nless_Dream]

:nono2:

:smack: :run:

[Nless_Dream]

u should patent everything u make so u can sue these scumbags :yuck::lol2:;)


:glare:

maybe fig should come up with a different design? looks better with holes because angles can put stress at a point where as circle spreads out stress.

[GhostlyEcho]

:smack: :run:

:lol2: bitch :glare:

[GhostlyEcho]

maybe fig should come up with a different design? looks better with holes because angles can put stress at a point where as circle spreads out stress.

thats true if push comes to shove i am pretty sure he has these in blue prints and dated so he can show proof


L tuned pirates suck anyway over priced hookers:po

[Nless_Dream]

hey fig, instead of all those holes, can u just make a solid piece? dont' think a pound will make that big of a difference. should be faster in production.

[GhostlyEcho]

hey fig, instead of all those holes, can u just make a solid piece? dont' think a pound will make that big of a difference.

arent u boosted anyway , off topic i plan to go down to VA next month u taking me to the house of titties fool ?:rofl:

[Nless_Dream]

arent u boosted anyway , off topic i plan to go down to VA next month u taking me to the house of titties fool ?:rofl:

check out PaperMoon, they got ppl in Lambos and shit going there. entrance fee :thumbsdown: Jenna Jameson was there couple months ago. :woot:

[Nless_Dream]

arent u boosted anyway , off topic i plan to go down to VA next month u taking me to the house of titties fool ?:rofl:

:smack: again! look at my sig fool :smack: again

[GhostlyEcho]

:smack: again! look at my sig fool :smack: again

not my fault ur cheap and don't get boost , i will be in springflied look out for a black is300 making a lot of noise by the mall lol

[Nless_Dream]

not my fault ur cheap and don't get boost , i will be in springflied look out for a black is300 making a lot of noise by the mall lol

:plotting:

[Nless_Dream]

not my fault ur cheap and don't get boost , i will be in springflied look out for a black is300 making a lot of noise by the mall lol

i can't help it, i'm an broke ass asian jew. :lol4:

[GhostlyEcho]

i can't help it, i'm an broke ass asian jew.

i am a broke Puerto Rican freaking GPR auto cleaned me out for coil overs, sways and shift knob, tanable rear under brace my suspension is tighter then a virgin now


:(

[Nless_Dream]

one of the rough cut looks ok, but the other one looks like it was machined into 2 of the circles.

[FIG]

yes this is one reason why I had not cut it out just yet.

[Nless_Dream]

yes this is one reason why I had not cut it out just yet.

oh ok.....

can't wait to get these.

any update on your rear diffuser?

[FIG]

so on the diffuser, I have the rear section of the car to keep devloping it but the temperature is dropping pretty quick and I am out of room inside. My Carbon manufacturer just got a CNC cutting table, so we should be able to do it as a simple peice and potentially save some setup. I am going to see what I can get done in the next few weeks around christmas.

Fig

[Nless_Dream]

so on the diffuser, I have the rear section of the car to keep devloping it but the temperature is dropping pretty quick and I am out of room inside. My Carbon manufacturer just got a CNC cutting table, so we should be able to do it as a simple peice and potentially save some setup. I am going to see what I can get done in the next few weeks around christmas.

Fig

nice, can't wait. no word on price range for diffuser yet huh?

i'll gladly test it out for u :)

[GhostlyEcho]

nice, can't wait. no word on price range for diffuser yet huh?

i'll gladly test it out for u :)

:nono2: let a real driver test it out since i drive at 80 above going to school 5 days a week

[Nless_Dream]

:nono2: let a real driver test it out since i drive at 80 above going to school 5 days a week

:nono: drive the limit :run: u new yorkers have too many pott holes

[GhostlyEcho]

:nono: drive the limit :run: u new yorkers have too many pott holes

thATS GOING SLOW everyone is passing me on the way to school its A 25 miles highway drive

[camelflage]

where does this project stand? :whistle:

[Nless_Dream]

where does this project stand? :whistle:

get back in line josh. i'm gonna b the first to have Figs Rear Brace. :rofl:

[FIG]

I have these rought cut parts if you want them...they aint pretty, but all I can do until I can cut some myself.
http://i88.photobucket.com/albums/k195/Figbline720/blem/DSC01676.jpg
http://i88.photobucket.com/albums/k195/Figbline720/blem/DSC01677.jpg
http://i88.photobucket.com/albums/k195/Figbline720/blem/DSC01675.jpg
Fig

[-Tom-]

I'll take them for free, I got nothin better to do than file them down to be nice....Then I'll paint them up teal..

[Nless_Dream]

I'll take them for free, I got nothin better to do than file them down to be nice....Then I'll paint them up teal..

don't think he'll give them for free lol.

[camelflage]

i will wait for nice ones... gotta rep the FIGS logo. :lol2:

[Nless_Dream]

i will wait for nice ones... gotta rep the FIGS logo. :lol2:

yup, same here. gonna do a write up on it also :woot:

[D.Thern]

hows it drive?? Any difference? I have been debating on a lower tie bar for a while, but dont know if they actually do anything, yaknow?