BlackSportD
09-15-2008, 07:33 PM
Offering a group buy again, but this time on two products.
Give your vehicle a useful function synonymous with high end luxury cars. This module simplifies driving in reverse and parallel parking by automatically lowering the passenger side mirror when the vehicle is in reverse. With the mirror tilted down it is possible to see curbs and debris before striking them!
The module is very intuitive and has two modes you can set depending on how frequently you want the system to work and how to bypass the function if the situation arises. The module also employs a time delay to prevent the mirror from “see-sawing”- repeatedly going up and down - during parrallel parking. The distance it travels for both down and up are use end adjustable.
^^^Letting go of 5 mirror tilt modules for $50 free shipping -anywhere.
1)
2)
3)
4)
5)
Tired of trying to pull into traffic and even with the slightest wheel spin the Lexus traction control activates, shutting the throttle and cutting off engine power to the point of not being able to accelerate? Tired of having to push the button to turn the track off every time you start up the car?
The traction control memory module is used to add a memory feature to the traction control switch in your vehicle. The unit automatically stores the ON/OFF state of traction control when the vehicle is shut off and restores the setting when the ignition is turned on. This module is compatible with any push button (momentary) switch.
For both Automatic and Manual Lexus IS 300s
^^^And also letting go of three Trac Memory Modules for $32 free shipping -anywhere.
1)
2)
3)
Here is a picture of an installed Mirror tilt module on I believe Raptor/Edgy's car.
http://i84.photobucket.com/albums/k32/BlackSportD/Token%20DIY/Mirrormodule.jpg
Two of only the three wires you need to touch to install the Traction Control Memory Module. Installation is a cinch, you only need to slide out the bottom tray that holds the trac/snow button, now screws or bolts involved.
http://i84.photobucket.com/albums/k32/BlackSportD/Token%20DIY/Tracmodgroundandtracsignal.jpg
A video of the Mirror Tilt Module working on the first Yaris I've put it in. The time delay for the return tilt is for parallel parking situations.
Mirror Tilt Yaris (http://www.youtube.com/watch?v=G19Pkjv-I4Q)
Give your vehicle a useful function synonymous with high end luxury cars. This module simplifies driving in reverse and parallel parking by automatically lowering the passenger side mirror when the vehicle is in reverse. With the mirror tilted down it is possible to see curbs and debris before striking them!
The module is very intuitive and has two modes you can set depending on how frequently you want the system to work and how to bypass the function if the situation arises. The module also employs a time delay to prevent the mirror from “see-sawing”- repeatedly going up and down - during parrallel parking. The distance it travels for both down and up are use end adjustable.
^^^Letting go of 5 mirror tilt modules for $50 free shipping -anywhere.
1)
2)
3)
4)
5)
Tired of trying to pull into traffic and even with the slightest wheel spin the Lexus traction control activates, shutting the throttle and cutting off engine power to the point of not being able to accelerate? Tired of having to push the button to turn the track off every time you start up the car?
The traction control memory module is used to add a memory feature to the traction control switch in your vehicle. The unit automatically stores the ON/OFF state of traction control when the vehicle is shut off and restores the setting when the ignition is turned on. This module is compatible with any push button (momentary) switch.
For both Automatic and Manual Lexus IS 300s
^^^And also letting go of three Trac Memory Modules for $32 free shipping -anywhere.
1)
2)
3)
Here is a picture of an installed Mirror tilt module on I believe Raptor/Edgy's car.
http://i84.photobucket.com/albums/k32/BlackSportD/Token%20DIY/Mirrormodule.jpg
Two of only the three wires you need to touch to install the Traction Control Memory Module. Installation is a cinch, you only need to slide out the bottom tray that holds the trac/snow button, now screws or bolts involved.
http://i84.photobucket.com/albums/k32/BlackSportD/Token%20DIY/Tracmodgroundandtracsignal.jpg
A video of the Mirror Tilt Module working on the first Yaris I've put it in. The time delay for the return tilt is for parallel parking situations.
Mirror Tilt Yaris (http://www.youtube.com/watch?v=G19Pkjv-I4Q)